servo unit
英 [ˈsɜːvəʊ ˈjuːnɪt]
美 [ˈsɜːrvoʊ ˈjuːnɪt]
网络 伺服机件; 伺服装置; 伺服单元
双语例句
- In an electric system used for EDM, the controling of servo unit looks more macroscopic than the pulse power about the occur time, but its effect on discharging is fairly important.
用于电火花成形机的伺服系统，与脉冲电源相比，其控制从时间上来说相对更加宏观一些，但对放电的影响也是至为关键的。 - The whole digit-controlled lathe of lower prices generally choose stepping drive unit price is higher, and the machine tool selection servo drive unit.
整台数控机床价格较低的一般选择步进驱动单元，而价格较高的机床选择伺服驱动单元。 - Its function is to connect the oil supply system and the emergency trip system with servo unit, and then makes them come into being a loop.
油管连接供油系统、危急遮断系统与执行机构，并使之构成回路系统。 - By analyzing the basic principle and mathematics model of an electro-hydraulic servo unit for ship rudder, this paper designs a single neuron adaptive PID controller.
在分析了船用舵机电液伺服单元的基本原理和数学模型的基础上，设计了单神经元自适应PID控制器。 - Robust Control Research for Electro-Hydraulic Servo Unit of Ship Rudder
船用舵机电液伺服单元的鲁棒控制研究 - Selection of AC Servo Drive Unit Capacity in CNC Machine Tool
数控机床交流伺服驱动单元容量的选择 - Along with the gradual improvement of the servo control technology, the servo drive unit is gradually becoming the main drive unit, servo drive unit price also gradually to reduce.
随着伺服控制技术的逐步提高，目前伺服驱动单元正逐步成为驱动单元的主力军，伺服驱动单元的价格也在逐步减低。 - AC servo unit based on embedded operation system
应用嵌入式操作系统的交流伺服单元 - The electro-hydraulic servo unit which the system used, is the digital electro-hydraulic servo unit, the servo amplifier is embedded in the electro-hydraulic servo valve;
系统的电液伺服装置为数字式电液伺服装置，其中，伺服放大器嵌入在电液伺服阀中； - In view of the influence of the controllable pitch propeller's hydraulic servo unit on the propulsion system, the simplified model of the controllable pitch propeller's hydraulic servo unit is proposed.
考虑到调距桨液压伺服机构对推进系统的影响，论文给出了调距桨液压伺服机构的简化数学模型。 - This paper introduces the connection of speed servo adjusting unit and the throttle, simplifies the control circuit of the manual throttle and offers two practical methods of speed testing.
介绍伺服调速及油门机构的连接，简化手油门控制电路，给出两种实用的测速方法； - The reliability simulation analysis of an electromotive servo unit is done with dynamic reliability distribution simulating algorithm for the first time.
本文首次采用动态可靠性分配仿真算法，对一电动助力器可靠性进行仿真分析。 - On the basis of Velocity Servo Unit, a DDC system for position control is designed. In this paper, the composition of hardware and the design of control software is introduced, and the choice of parameters is discussed.
在速度伺服单元的基础上，设计位置控制DDC系统，并介绍系统的硬件构成和控制软件，还对系统参数的选择进行了讨论。 - Research In Motion Control Algorithm Based On Digital Servo Control Unit
基于全数字伺服控制单元的运动控制算法的研究 - The communication among the CNC main control unit, servo driving unit, and the I/ O unit is studied, the communication on the basis of industrial Ethernet network and Intranet/ Internet is researched, and key technologies are provided.
详细介绍了嵌入式数控系统内CNC主控单元与伺服驱动及I/O逻辑控制等各单元间的通信、车间级工业以太网络的通信和Intranet/Internet网络通信，并给出了关键实现技术。 - An improved repetitive control algorithm was developed to improve tracking accuracy for a linear servo unit in a numerical piston lathe.
为了提高非圆数控车削系统中直线伺服单元的跟踪精度，该文提出了一种改进的离散重复控制算法。 - Design and Experimental Research on Permanent Magnet Linear Synchronous Servo Unit Used in NC Machine Tool Feeding System
机床进给用永磁同步直线伺服单元的设计与实验研究 - Real-time control of the servo unit, the selecting and showing of the data state, the transferring of the PLC programme and the manual teaching are all finished.
实现了伺服驱动系统的实时控制，状态数据的采集与显示、PLC程序的调用、用户参数输入和人工示教的功能。 - Universal Test Techniques for Servo Unit in Airborne Fire Control Radar System
机载火控雷达伺服分机通用测试技术 - The technologies of the interface among motion controller and servo unit are studied, and the controlling mode of "PC+ motion controller" is applied in the swing control module.
在抛光头摆动模块中，以PC+运动控制卡为硬件平台，开发了开放式的控制系统，研究了运动控制卡、伺服单元的接口技术； - A large power combined compensated driving linear servo unit based on the principle of voice coil motor is presented. Its force constant, maximum driving force and maximum driving current are 82 N/ A, 820 N and 10A respectively.
依据动圈电动机的基本原理，研究开发了一种大推力复合补偿驱动的直线伺服单元，其推力常数为82N／A，最大驱动电流为10A，最大推力820N。 - The mathematic model has been established and its characteristics have been analyzed through analyzing the principle of servo driving unit, thus providing theoretical basis for machine commissioning.
并通过对伺服驱动单元原理的分析，建立了数学模型，分析了其特性，从理论上为调试提供了依据。 - Furthermore, the theory of repetitive control was used to design the controller available for the linear servo unit, whose design details and stability analysis were presented. Finally, simulation analysis of the controller performances was carried out.
应用重复控制理论设计了适于直线伺服单元的重复控制器，给出了详细的设计过程和稳定性分析，对控制器的性能进行了仿真分析。 - Repetitive control based linear servo unit under YBT CIMS Environment
集成制造系统中基于重复控制的直线伺服单元 - The characteristic of motion control system based on servo control unit is pointed out, and the motion control algorithm has been analyzed. In a word, a new kind of motion control algorithm based on digital servo control unit has been designed.
文章阐述了基于全数字伺服控制单元的位置控制系统的特点，并且对运动控制算法进行了分析，研究并实现了一种新的基于全数字伺服控制单元的运动控制算法。 - This paper is to research the servo control unit of the machining centers.
针对数控加工中心系统的伺服运动控制系统进行了研究。 - The Electro-hydraulic control servo unit of ship is the core part of auto-rudder, which links the rudder and operate device. It operates the control single and feedback control.
舵机电液伺服控制单元是整个舵机的核心部件，它是连接舵机与操纵装置之间的部分，起到执行控制信号，并进行反馈控制的作用。 - A high-speed, high reliability bus is needed to realize the communication among CNC control unit and each servo unit, in order to realize the excellent performance of a high-grade CNC machine tool.
为了达到高档数控机床所要求的优异功能和性能，需要使用一种高速率，高可靠的总线来实现数控机床控制单元与伺服单元之间的通讯。 - Finally, the interpolation algorithm, velocity planning curves, multi-card synchronization and other aspects are tested on the motion control platform, consisting of the motion controller and servo unit.
最后在由该运动控制器及伺服单元组成的运动控制平台上，对上述的插补算法、速度规划、多卡同步控制等方面进行了测试。 - Under simplified assumptions, through establishment of modes of the axis AC servo drive unit model, the servo motor model and the dynamics model mechanical transmission, the model of servo feed system is established.
经简化假设，建立了各轴的交流伺服驱动单元模型及交流伺服电动机模型，再通过机械传动机构的动力学模型，建立了伺服进给系统模型。